Optimised Tools For The Future Of Sustainable Aircrafts

Sandvik Coromant tools and processes support high-quality machining of difficult-to-machine HRSA components.

“Good design is, for people and the planet, an increasingly critical focus,” according to the UK Government’s UK Innovation Strategy. That includes aerospace, where aircrafts of the future will be sustainably made and support net-zero objectives around the world.

Here, Steve Weston, Industry and Tech Centre Manager — Aerospace at Sandvik Coromant, explains why optimised tools and process knowledge will be crucial to sustainability and innovation in aerospace, especially when working with increasingly difficult-to-machine materials.

Sustainable aircraft will rely increasingly on next-generation powder-based heat resistant super alloys (HRSAs) and advanced ceramic matrix composites (CMCs), as they can withstand high temperatures for more efficient fuel burn and low emissions. However, these materials are required to be heat resistant, creep resistant and keep good material properties under extreme temperatures. Hence, this presents challenges at the machining stage.

Sandvik’s Innovation Strategy

The UK Innovation Strategy report says that new technologies and processes will be key to manufacturing and machining these advanced materials at scale. Collaboration within the industry will also be essential, which is already being demonstrated at the Advanced Manufacturing Research Centre (AMRC) in Sheffield, UK.

Sandvik Coromant was one of the original members to join the AMRC when it was founded in 2000, along with Boeing and Messier Dowty (today Safran Landing Systems). They were later joined by the likes of British Aerospace, Rolls-Royce, GKN Aerospace and Airbus and, today, the AMRC has approximately 118 members in total.

Most of the centre’s projects are collaborative by nature, funded and selected by all members, and the AMRC now employs over 500 highly qualified researchers and engineers from around the globe. All are devoted to multi-million-pound projects that can support a strong, pro-innovation economy.

Sustainability In Aviation

For aerospace, if we are talking about sustainability then new technologies and processes should focus on the ability to combust new fuel types, like sustainable aircraft fuel and liquid hydrogen, to create lower emissions. As always, the ability to run hotter means there is a more efficient fuel burn.

If we couple this with higher compression ratios, which most new and future engines can support, then the result is greater efficiency. That means less fuel is combusted with increased power and reduced noise.

With aero-engines, the engine’s core is relatively small and the fan on the front is relatively large. As a result, a limiting factor is the speed at which one can rotate the fan.

To remedy this, over the last five-to-ten years, gearboxes have been introduced between the fan and the core of the engine. They enable the fan to run more slowly while the engine core runs faster for high compression and better fuel efficiency.

However, HRSA components are needed to make this work. Such materials are metallurgically-composed to retain their properties when exposed to extreme temperatures but this also means the stresses generated when machining these materials are high. The unique capability of these nickel, iron and cobalt-based superalloys to perform close to their melting point also gives them generally-poor machinability.

Blisks

One part that is increasingly used in aerospace is blisk, a component that comprises both a rotor disk and blades. Unlike traditional disks, which have slots in the outside diameter that blades fit into, blisks combine the disk and blades into a single component and are lighter than conventional disks with blades.

Source: Sandvik Coromant

This decreases the number of components in the compressor at the same time, decreasing drag and increasing the efficiency of air compression in the engine by around 8 percent.

Blisks are generally located on the cold compressor side of aircraft engines and they are usually made of titanium in the initial stage before migrating to HRSA materials when they are closer to the combustion chamber. Machining these components effectively, and to the highest standards, requires optimised tools and process knowledge relevant to these advanced materials.

That is why Sandvik Coromant’s internal project areas focus so strongly on a variety of key aero-engine components and features. They include disks, blisks, shafts and casings among others.

In particular, we are seeing an increased use of blisks in today’s gas turbine engines and expect this trend to continue as the last ounces of potential power and fuel efficiency are extracted from current engine architectures. However, blisks present unique machining challenges because they are often made from HRSAs. The components demand tight dimensional and geometrical tolerances while maintaining high standards of surface integrity and surface finish.

Managing Challenges

In response to these machining challenges, Sandvik Coromant offers a number of tooling solutions to support cost-effective, high-quality machining of aero-engine components. One such method that Sandvik Coromant recommends is high feed-side milling. The technique involves a small radial engagement with the workpiece, which allows increased cutting speeds and feed rates and axial cutting depths with decreased heat, chip thickness and radial forces.

To support this method, Sandvik Coromant has developed the CoroMill® Plura HFS high feed side milling range. The range features a series of end mills with unique geometries and grades that is made up of two endmill families. One family is optimised for titanium alloys, the other for nickel alloys.

Chip evacuation and heat are specific challenges when machining titanium, so the first family presents a solid version of the tool for normal chip evacuation conditions. The second family features an internal coolant and a new cooling booster for optimum swarf and temperature control.

A customer trial was performed to test a 12 mm diameter CoroMill® Plura HFS end mill against a same-sized competing tool. This trial involved machining a low-pressure turbine (LPT) case made from aged Waspaloy 420 nickel-based alloy, using a horizontal machining centre with an increased axial depth-of-cut and reduced radial depth-of-cut.

The outcome was that metal removal rates were increased substantially with CoroMill® Plura, leading to an impressive 198 percent productivity increase for the customer. The solution has also been applied to blisks as well as turbine disks and casings, machining blades and weight reduction scallops.

Other solutions in Sandvik Coromant’s portfolio include their next-generation turning grades, in both carbide and polycrystalline cubic boron nitride (PCBN), which are designed for the high-speed finish turning of components made from ISO S materials. The grades are, in turn, complemented by next-generation ceramic rough turning grades designed for class-leading performance. The latest finishing grades are being tested and optimised by Sandvik Coromant to deliver consistent surface integrity that is demanded by aerospace engine manufacturers, while also producing components with tight tolerances.

What’s Next?

As outlined in the UK Innovation Strategy report, global hubs for innovation, like the AMRC, will continue to see “companies of all sizes creating breakthrough new products, becoming more efficient and scaling to full growth, all with an eye to the global, as well as domestic market.”

HRSA components, such as blisks, will also become more prevalent in tomorrow’s sustainable aircraft. Certainly, one of the leading aerospace manufacturers that Sandvik Coromant works with at the AMRC is developing larger ultra-fan engines, to achieve super fuel-efficient designs that run on biofuels.

Other key innovations include flexible resin-transfer moulded blades that are designed to untwist as the fan’s rotational speed increases. These technologies are already prevalent in mid-sized, single aisled planes such as the Airbus A321. Other future predictions include mid-sized aircraft to be fuelled on hydrogen, while smaller domestic planes to drive electric ambitions.

There are now many small start-up companies that produce smaller electric engines for aircraft, and CNBC reports that the market for flying cars A.K.A electric air taxis could rise to US$1.5 trillion globally by 2040. There might even be regionalised landing points in the future. For instance, passengers may board a hydrogen plane to travel more locally, say around Europe, or a biofuel plane to fly across the globe.

At the component level, these applications will rely on next-generation materials for which Sandvik Coromant’s optimised tooling solutions, and its extensive process and application knowledge, are already well-equipped. Sandvik Coromant and the AMRC will help to ensure that optimised process design remains critical for aerospace’s leading manufacturers, and also for people and the planet.

What You Missed:

Malaysia’s Manufacturing, Construction, Service Sectors May Recruit Workers From 15 Countries
U.S. Senate Votes To Move Ahead On Chip Bill To Compete With China
3D Printed Bone Grafts To Be Approved For Patients In Europe
Solid State EV Batteries Could Cut Emissions By Up To 39 Percent
GM, Ford Seek U.S. OK To Deploy Self-Driving Vehicles Without Steering Wheels
Machining With A Microscope
Close To 1 In 10 Cars Sold In Singapore In 2022 Was Tesla
China’s BYD Electric Cars Headed For Japan
E-Catalogues Revolutionising The Cutting Tool Industry
3D Printing Can Strengthen America’s Medical Supply Chain

WANT MORE INSIDER NEWS? SUBSCRIBE TO OUR DIGITAL MAGAZINE NOW!

CONNECT WITH US:  LinkedIn, Facebook, Twitter

Letter to the Editor
Do you have an opinion about this story? Do you have some thoughts you’d like to share with our readers? APMEN News would love to hear from you!

Email your letter to the Editorial Team at [email protected]